Everything Washington Biomedical Services publishes on dialysis equipment calibration in one place: the full service overview, the related services we provide, and the locations we cover.
Use this page to find the exact dialysis equipment calibration service you need. Everything Washington Biomedical Services publishes for this area is listed below, starting with the full overview.
Every calibration performed produces two numbers that matter: what the device read when we arrived, and what it read when we left. Skipping the first one makes the record useless in an audit, because it removes any way to establish whether the instrument had drifted out of tolerance during the interval it was in clinical use.
Work is performed to manufacturer specification and the applicable regulatory standard, and the record says which one was applied.
Calibration is the measurement step, not the repair step. A device is compared against a reference standard with documented traceability, the deviation is recorded, and the instrument is adjusted until it reads true across its working range — then the as-found and as-left values are both written down, because the as-found figure is what tells you whether anything treated on that device since the last visit was affected.
Calibration intervals are not arbitrary. They come from the manufacturer's specification, the device's history, and how hard the department runs it. An instrument that drifts twice in a row needs a shorter interval, not the same one repeated, and a technician who does not adjust the schedule is recording a problem rather than solving it.
Every visit produces documentation an inspector can read without a translator: what was done, to what standard, by whom, and when it is next due.
Technicians are qualified for the equipment they touch, and the qualification is on file rather than asserted.
Findings are reported plainly, including the ones that mean a device should be taken out of service.
Calibration is the measurement step, not the repair step. A device is compared against a reference standard with documented traceability, the deviation is recorded, and the instrument is adjusted until it reads true across its working range — then the as-found and as-left values are both written down, because the as-found figure is what tells you whether anything treated on that device since the last visit was affected.
Scope is written down before the work begins, including what is excluded. Most disputes about equipment service are really disputes about scope that nobody put in writing.
Gaps in a maintenance record are read as gaps in maintenance, whether or not the work was done. The paperwork and the work are the same obligation.
Tell us what you operate and where, and you will get a straight answer about what it needs, what it costs, and how soon someone can be there.
Current developments in dialysis equipment calibration, with sources for further reading.
